DIY Christmas Village - Putz Glitter House - Tutorial #2 - Cottage with Attached Garage

Here is the second glitter house from my "DIY Christmas Village" step-by-step tutorial series. My goal is to create several different houses in order to build my own Christmas village set - you are welcome to join me in my journey!

Making handmade Christmas decorations is a popular and great craft idea, and I am sure that you will have as much fun as me creating a modern version of old vintage Putz houses!

The current project will allow you to make a cute cottage with an attached garage.

If you missed the first tutorial, you can begin here and come back to this second tutorial later. 

Step 1 - Cut + Fold the Pieces

First, you will need to download and print my free printable template here.

The template is for a 6 x 3 inches house, on an 8 x 7.5 inches base.

Since I already explained and pictured in depth the folding & cutting steps in my first tutorial, and since the method is essentially the same for all houses, I will simply resume the steps here. But you can refer to the pictures in my first tutorial if you are not sure how to proceed.

Cutting:

Using masking tape, fix each page of the template to a cardboard.

Take an x-acto or utility knife, a metallic ruler and a cutting mat. Make sure that your x-acto blade is new, to provide the sharpest and cleanest cut possible.

The cut lines are the solid lines. Start with all the holes (windows, light hole).

Continue cutting along all the other cut lines. You can use scissors for these instead of the x-acto, if you prefer. Don't forget the cut lines between the glue tabs.

*TIP: If you plan to make several houses based on the current template, use the cut cardboards as patterns to trace all your houses before proceeding to the next steps. This will save you time (and paper).

*OPTIONAL: for the top borders of the fence, you can use a decorative punch or decorative scissors to cut a pretty border. 

Scoring:

Scoring will allow you to make an easy, clean and crisp fold.

Take the first cut cardboard piece and its cut paper template. Based on the paper template, trace the fold lines on the BACK of the cardboard piece with a pencil. Do the same for all cardboard pieces.

Using an x-acto and metallic ruler, make a LIGHT score line along the fold lines. Do not press down hard with the x-acto - you only want to slightly and gently slice a thin layer of the cardboard fibers.

Folding:

Once all scoring is done, gently and slightly fold along the score lines towards the opposite side of the cardboard (towards the front of the piece).

Now make the "real" folds, toward the back of the piece. Press firmly all along the folds.

All of the pieces are now done:

Step 2 - Frost the Windows

For this step, you will need: vellum paper (or any translucent paper of your choice), pencil, scissors and glue stick.

Working on the back side of the pieces (the side that will be inside the house once assembled), trace and cut pieces of vellum paper to cover the window holes of each side/wall of the house.

The light hole on the back wall should NOT be covered with vellum paper - it must remain an open hole in order for you to be able to insert a LED flicker light later.

Carefully glue the vellum pieces to the cardboard with glue stick. Make sure that the vellum is glued flat and without any wrinkles.

Step 3 - Assemble the House

For this step, you will need: good white craft glue (I personally love Crafter's Pick The Ultimate, or Aleene's Original Tacky Glue), glue brush (or an old or cheap brush), and plate to pour the glue.

Working one glue tab at a time, apply a thin layer of glue on the tab with the brush. Then carefully align both parts together and firmly press down all along the tab and hold until you feel that both parts are bonded enough to stay together.

For this house, I proceeded in that order:
1. Walls of the house
2. Flaps supporting the roof
3. Fence (glued to the bottom of the base)
4. House on the base (before gluing, I placed the house where I wanted it to sit on the base, and traced the house contour on the base with a pencil, to know where I needed to fix the house)
5. Roof
6. Chimney

Do NOT glue the cutouts for the doors and windows yet - we will need to paint them first, this will make our job a lot easier.

Let the glue dry completely before proceeding to the next step.

In the meantime, choose your paint colors and accessories (optional), and set up your work station for the painting step.

Step 4 - Paint the House

For this step, you will need: acrylic paint, paint brushes, palette and cup of water to wash your brushes.

Step 5 - Add the Accessories

Glue the cutouts for the window frames and the doors to the house. I personally prefer to use a thin layer of white glue for this, but you can use glue stick if you prefer.

Then, glue the accessories with white glue.

Besides the trees, wreath and car, I decided to add a gray driveway, and to make a tiny snowman - I used my fake snow for the body, small branch tips for the arms (I simply picked a fallen tree branch from my backyard), made a little cone with paper and glue for the carrot nose, and used paint for the eyes and button.

I also glued a sisal tree to the roof of the car (I used a Hot Wheels toy car from the dollar store) and attached baker's twine.

Step 6 - Add the Snow

For this step, you will need: fake snow and a palette knife (or stick or brush).

You can either buy synthetic snow - DecoArt Snow-Tex, Aleene's True Snow, etc. - or you can make it yourself using my fake snow recipe.

I spread the snow in that order:
1. Ground, stand of the trees, around the house at the foot of the walls 
2. Edges of the windows
3. Roof and chimney
4. I also added snow to the sisal trees, to make them more snowy
5. And a little bit on the car

Let the snow dry completely.

Step 7 - Add the Glitter

Now it's time to make your house sparkle!

For this, you will need glitter. I use Hemway Ultra Fine Craft Glitter - Iridescent White, but you can use any glitter you want. I prefer white glitter since I think it is more "snowy", but you can use colored glitter if you prefer.

You will also need: non-yellowing medium*, paint brushes, a shaker or spoon to sprinkle the glitter, and a plate to collect the glitter leftovers.

•UPDATE: Instead of Mod Podge, I am now using Liquitex Acrylic Fluid Gloss Medium, as I found that Mod Podge was yellowing after some time. Liquitex Medium is non-yellowing. You may also use any non-yellowing medium or finish.

Begin applying the medium with a brush on the ground. Work one small area at a time.

Then, sprinkle glitter on the medium, and shake excess glitter into the plate.

Continue applying a coat of the medium/glitter mix on the rest of the yard and on the house (walls, window frames, doors, roof, etc.). Don't forget the fence, and the snow on the window edges and accessories.

Do NOT apply on the vellum windows, as the medium will wet the vellum and make it wrinkle.

Collect the glitter leftovers to reuse them for the next house.

Step 8 - Add the Final Touches

Use a cotton ball to add a smoke effect to the chimney.

Insert a battery operated LED tea light candle in the house - do NOT use a real candle!

I also made a tiny scarf and attached it around the neck of the snowman.

And voilà! We now have our second glitter house ready to be placed under the Christmas tree :)

Ready to make your next house? Go to my tutorial #3: